2020. 2. 11. 06:01ㆍ카테고리 없음
PS2 HDLoader.For running original PlayStation2HDLoader or the new HDAdvance you need:. An official Sony PS2 network adapter -Both types - Ethernet only or Ethernet and Modem can be used. A suitable PS2 HDD - hard disk drive. You have two options here - theofficial Sony hard disk drive, or a standard IDE hard disk drive witha capacity of AT LEAST 40GB. If you use a standard IDE drive, you willneed to make sure that it actually fits into your network adapter.There are a few known compatibility issues with some non-Sony harddisk drives, please see the compatibility section for more information. PlaySation2 with a 'DEV9' expansion port. All PS2's have thisexpansion port except for the first three JAP models.The maximum hard disk drive size supported by HDLoader is 120gb, and theminimum size is 40gb.
If you use a HDD with a capacity larger than 120GB(ie: 160GB, 200GB) then only the first 137GB will be useable.HDLoader is provided as a pressed, bootable Playstation 2 disc - Nomodifications of console are requiredHD Loader is compatible with Mod-ChipsYou can play any online game which do NOT use DNAS. As stated on thecompatibility page the DNAS check will fail when HDLoader is used, so it isnot possible to play DNAS enabled games online using HDLoader.PlayStation2HDLoader installation.
A PS2 Network adapter shown by itself (top) and inserted to a console (bottom).The Network Adaptor was released together with the launch of the service. Two models of the adapter were available - one with a and an jack for connection (sold in North America), and one with only an Ethernet interface (sold in Europe and other regions). A start-up disc ('Network Access Disc') is included with the Network Adaptor and installs a file on the memory card for connection settings which are accessible by all but one Network Adaptor compatible game. Was released in November 2001 and supported the Network Adaptor hardware, but not the software as it was not finalized until much later.The Network Adaptor also provides a interface and a to allow installation of a 3.5 in IDE hard disk drive in the expansion bay. As the two disk connectors are on separate circuit boards from the main Network Adapter one, third party connector replacements including a SATA connector and SATA to IDE converter are available.Slimline PlayStation 2 models have an ethernet port built-in, but no official hard disk drive interface. However, the first slimline model (SCPH-70000) has a complete Network Adapter onboard (including an analog modem in the earliest North American models), and may be modified to add an external IDE connector board.From the SCPH-75000 series onwards, Ethernet functionality was integrated into the I/O Processor (which was completely internally redesigned), completely removing the disk interface.The maximum supported rate is 100Mbit/s, at full duplex. It is also backwards compatible with 10Mbit/s hardware and configurations.Hard disk drive.
PlayStation HDD and Network AdapterThe PlayStation 2 Hard Disk Drive (PS2 HDD) was released on July 19, 2001 in Japan (together with the Network Adaptor) and on March 23, 2004 in North America. It requires the Network Adaptor to connect to the and to receive power. The HDD has a 40 capacity that can be used by games to reduce load time by putting data on the hard drive temporarily, or back up memory card data. Due to copyright protection, programs that are bootable directly from the HDD (e.g., PlayOnline Viewer, Pop'n Music Puzzle-dama Online) are keyed to the system when that system installs them. The HDD can be transferred to another PlayStation 2 system and files on the HDD can be accessed, but those specific programs cannot be booted without being reinstalled. Contrary to popular belief, a complete reformat of the HDD is not necessary upon transfer of the HDD between consoles, or else it would not be useful to have the HDD be preformatted and have preinstalled software, as is the case with the North American HDD unit.
An HDD Utility Disc is included to allow maintenance of the HDD (including defragmentation, disk repair and formatting utilities, along with a browser) and in North America, is also included. There are 35 North American games that support the HDD.called (later also and Open Playstation Loader) allow users to copy entire games to the HDD and run them without the discs.
They also allow using some standard consumer hard drives in the PS2, however they will not be compatible with software that is expecting the standard PS2 hard drive. This software combined with a hard drive allows one to play games without using the original disc.
This is desirable as it protects the fragile and perhaps rare game discs from harm, in some cases it may improve performance. However, the practice is not without controversy. HDLoader bypasses the usual copy protection mechanisms built into the console, allowing for piracy.North American releases with HDD support., and use the HDD to improve replays. (If the HDD is not installed, static screenshots are shown as replays.
With the HDD, full -like replays can be displayed). The Final Fantasy XI game that came bundled with the 40GB hard drive that required the Network Adaptor. Japanese releases with HDD support. (A-Train 2001 + Train-Pack) installs 256 MB to the HDD, and the Train-Pack installs an additional 14 MB.
installs 1 GB to speed up load times. uses the HDD for save games and as a cache for game files to decrease load times. installs 128 MB to speed up the game, so it no longer 'Freezes' in game to load the needed data from the Game CD-ROM. installs 1024 MB to reduce load times. installs 128 MB to reduce load times.
Movie 6 Net Downloads
can cache song files to the HDD to reduce load times. In addition, using HDD caching will enable a bonus gameplay mode. (Both File 1 and ) installs 1 GB to the HDD for reduced loading times., has with new tracks to install on HDD.
Download Hdloader Elf For Ps2
installs to the HDD to reduce load times and allows the game to be saved to and loaded from the HDD instead of a Memory Card. installs 256 MB to reduce load times. (aka Dark Cloud 2) installs a 1,536 MB file to the HDD to reduce load times. The Asia version also supports the HDD (most Asia versions of games have HDD support removed). installs 1 GB to speed up load times. requires the hard drive for online play.
The game uses Square-Enix's PlayOnline service, which needs the hard drive so you can install the online interface. (and Final Fantasy X International) installs a 1,664 MB file to the HDD to reduce load times. (and the, and expansions) fully installs to the HDD so that it can be patched/updated.
Main article:As of mid 2010, it is possible to install and use the PlayStation BB Navigator (PS-BBN) and the HDD-OSD (HDD Utility-Disc) on every PlayStation 2 Console from every region. This can be achieved with the use of special 'patched' files for the HDD-OSD, PS-BBN, and a modified version of 'uLaunch' (a well known piece of PlayStation 2 homebrew software) called 'hacked-ule'. It is now also possible to install homebrew software to the HDD and make it launchable through the HDD-OSD and PS-BBN's 'Game-Channel', just like any other official HDD game. However, installing such homebrew software to the HDD still requires much work in a Hex-Editor. PS-BBN can now also be fully translated into any given language; the translation process involves the use of the 'Beta-linux' release for PlayStation 2 and a specially compiled kernel which gives access to the 'APA-ReiserFS' partitions.As of 2013, most (if not all) games that use the HDD to install data (to decrease load time) and/or to save/load (instead of using a Memory Card) can be used on any PlayStation 2 console from any region and on any HDD by using a Hex-Editor (or ATADPatcher v0.02) and some type of booting software 'ESR' (a well known piece of homebrew software for the PS2).
If a 'patched' copy of HDD-OSD and/or PlayStation BB Navigator (PS-BBN) is used, users can see all the data currently installed in the same way as with the official 'SONY 40 GB HDD' (SCPH-20401).References.